Noise Control Product Accessories
Even the best noise control materials will do little good if not trimmed and installed properly and securely. Over the years we have found the following items to be extremely helpful for gluing, fastening, stapling, mounting, and trimming of our products. All available from INC for your single source convenience.
IPA-02 Acoustic Foam Adhesive
A water-based synthetic latex adhesive specifically selected for use on acoustical urethane foams. Resists cracking, peeling, mildew, moisture and UV. Sets in one-to-five minutes. Packaged in 11-oz. cartridge for use with any standard caulking gun. Sufficient coverage for gluing 20 ft2 of foam. Meets NFPA 90A and 90B, Non Flammable.
Sorba-Glas® Trim Tape
Field cuts to Sorba-Glas are easily trimmed using our non-adhesive edge Trim Tape, and an industrial open-jaws stapler. Made of the same material as the impervious Sorba-Glas® aluminized vinyl facing. Trim Tape rolls are 4” wide, 100’ long. Operating temperature range is -30 to 250°F, and Trim Tape is resistant to moisture, lubricants, fuels, grease, and solvents. Flammability: ASTM E84 Class I.
#3 Grommet Kit
Our grommet kit makes it easy to place grommets exactly where you need them. Consists of a #4 trade size grommet hole punch and a #3 trade size grommet insert punch and die set and #3 brass grommets. Simply punch hole, place washer in die, fit material over washer, and position grommet into hole in material. The punch design ensures perfect alignment of washer and grommet pieces.
Mounting Pin Assemblies
These steel mounting pin assemblies cannot be beat when it comes to providing a simple, safe and secure method of attaching noise absorption quilts, foams, or liners to almost any clean, flat surface. Consists of a PSA base, pin and cap. Corrosion-resistant. 50 sets per box.
Nylon Curtain Hardware
Simple nylon nut, bolt and washer hardware is a good way to join overlapping edges of noise control curtain panels. Strong, won’t corrode, rust or come loose.
Industrial Stapler
An open-jaws industrial stapler ideal for field trimming cut edges of Sorba-Glas with Trim Tape. Box of 5000 staples included.
Ceiling Baffle Installation Hardware & Tools
All of the hardware including non-stretch woven wire cable, turnbuckles, crimping sleeves, beam clamps, and crimping tools are available from INC.
Other Products:
Sorba-Glas Noise Absorbing Wall Blankets
Panl-Sorb Acoustical Metal Panels
Bafl-Sorb Sound Absorbing Ceiling Baffles
Fabri-Sorb Decorative Acoustical Panels
Portable Acoustic Panels
Panl-Flow HVAC Silencers
Questions? Your INC Sales Engineer is ready to provide answers, planning help, application tips — whatever you need! Call us at 1-800-954-1998, send Email, or fill out a Request For Quotation — whatever is easiest for you.
Contact Us about Noise Control Product Accessories